Design and Fabrication of Laminated Low Pass Filters
doi: 10.3969/j.issn.1001-0548.2009.04.011
- Received Date: 2008-05-12
- Rev Recd Date: 2009-03-12
- Publish Date: 2009-08-15
-
Key words:
- fabrication /
- LPF /
- LTCC /
- stimulation
Abstract: A complete and effective design is introduced to realize the 0805 size of standard packaging laminated low pass filter (LPF) using the technology of low temperature co-fired ceramic (LTCC). The three-stage laminated LPF with 200 MHz cut-off frequency is successfully manufactured using the ceramic green tape with relative permittivity of 14 and tape-casting thickness of 25 μm. Testing results show that the three-order LPF sample can achieve a 3 dB return loss at 200 MHz and a 26 dB return loss at 500 MHz by Agilent 8722ES. And the measured results agree well with the simulated data. This method illustrates a way to resolve the consistency problems between simulation and manufacture.
Citation: | LI Yuan-xun, Bian Li-fei, LIU Ying-li, ZHANG Huai-wu, LI Jie. Design and Fabrication of Laminated Low Pass Filters[J]. Journal of University of Electronic Science and Technology of China, 2009, 38(4): 521-524. doi: 10.3969/j.issn.1001-0548.2009.04.011 |